|
|
|
|
Optimal customization
|
|
Energy efficient
|
|
Totally silent
|
|
Twin conductor (easy to install one-point connection to wiring system)
|
|
High level of comfort and health
|
|
Minimum elevation of floor
|
|
|
|
Warmtouch cable , our warming cable for under tile installation , is ideally suitable for both renovation and new construction. When using floor coverings suitable for under-floor heating systems, such as carpet, linoleum or laminated wooden floors, 0.394" of self-aligned concrete must cover the warming cable.
All building materials which come into contact with the floor warming element must withstand a temperature of 176°F and be suitable for floor heating systems.
The temperatures are easily controlled by means of a timer thermostat and floor sensor.
|
|
Warmtouch cable may be fixed on the substrate with the use of aluminium clips and spacers allowing for optimal customization or, alternatively, with adhesive strips.
Warmtouch Cable is easily customized and may be installed in specific areas or throughout the entire house.
Warmtouch Cable is equipped with a twin conductor (one point connection to wiring system).
|
|
Warmtouch Cable is maintenance free and may be integrated into the home automation system for the highest level of comfort and energy saving. Close proximity to the floor allows for reaching desired temperature quickly and efficiently.
The DOMOTECK® thermostat has been designed for safer operation of the heating wire.
By placing the floor sensor between two heating wires and setting the thermostat to its maximum setting, the floor temperature will not exceed 86°F.
Standards:
Warmtouch Cable has been tested in accordance to National and International Standards for safety (CEI IEC 60800).
Warmtouch Cable complies with wiring rules regarding EMC (Electromagnetic Compatibility).
Warmtouch Classic should be installed in accordance to National Electrical Code (NEC) and all applicable local codes.
Kindly follow the overview and later on the full Instructions of Installation.
Specifications:
|
|
Output Cable
|
3 W/FT 5 W/FT
|
|
Voltage
|
120V 60 HZ
|
|
Outer Insulation
|
PVC
|
|
Thickness Of Wire
|
0.173"
|
|
Protection Class
|
5/30mA GFCI
|
|
Connection
|
One Side Connection
|
|
Cable Color
|
Green
|
|
Supply Lead Length
|
13 ft
|
|
Available Length (in FT):
|
|
VOLT
|
WIDTH
|
120V
|
48
|
|
73
|
|
98
|
|
122
|
|
146
|
|
170
|
|
195
|
|
220
|
|
244
|
120V
|
73
|
|
146
|
|
220
|
|
292
|
|
366
|
|
|
|
|
|
|
DK Heating Systems, Inc. Copyright © 2007 All Rights Reserved.
587 N. Edgewood Ave. Wood Dale, IL 60191 service@dkheatingsystems.com
Toll free phone: 800-959-9276 Local phone: 630-787-0887 Fax: 630-787-0572
|
|